Contact with us for any Solution
ASTM B564 UNS N10276 Blind Flanges and Nickel Alloy C276 Slip On Flange manufacturer in India
If you are looking for a product to connect 2 pipes or tubes then a variety of flanges are available in the market. One such flange is the Hastelloy C276 Flanges. It is used to measure the flow rate of liquids or gases in a particular pipe. Therefore eliminating the need for drilling a bore into the pipe to check the flow rate. These Hastelloy Flanges have a higher melting point of 1370 degrees C. This allows the flange to operate at a higher operating temperature. Wnr 2.4819 Weld Neck Flangeis used to stop one end of the pipe or valve opening. Forging these flanges makes them strong.
Hastelloy Flanges manufacturers recommend these as they remain in shape due to the fact that they are made up of a single piece of metal. The different sizes of these flanges range from ½ inch to 60 inches. Hastelloy C276 Flanges are widely used in sour gas applications. The waste produced by these industries is toxic and requires Nickel Alloy C276 Slip On Flange to absorb the toxicity. Oxyacetylene and submerged arc method is not recommended for fabrication of ASTM B564 UNS N10276 Flange that is meant to be used in corrosion service. They are said to harden easily when compared to other austenitic stainless steel.
ASME SB 564 N10276 Blrf Flange may require intermittent annealing with several cold work stages. Whereas, hot forming of these flanges should be performed between 1600 degrees F to 2250 degrees F. Hastelloy C276 Lap Joint Flange is widely used in marine engineering, waste treatment, and pollution control. The Uns N10276 Blind Flanges are usually rapidly quenched after solution heat treatment. They are widely used to close or terminate pipes. Hastelloy Blind Flangeis the best option for industries that use corrosive chemicals on a daily basis.Hastelloy Flange Ratingdiffers as per the class that it belongs to.
Types of Hastelloy C276 Flanges
- ASTM B564 UNS N10276 Welding Neck Flanges/ WNRF
- ASTM B564 UNS N10276 Plate Flanges
- ASTM B564 UNS N10276 Slip On Flanges/ SORF
- ASTM B564 UNS N10276 Blind Flanges
- ASTM B564 UNS N10276 Threaded Flanges
- ASTM B564 UNS N10276 Socket Weld Flanges
- ASTM B564 UNS N10276 Orifice Flanges
- ASTM B564 UNS N10276 Blank Flange
- Blank Flange Rotatable Hastelloy C276
- ASTM B564 UNS N10276 Welding Flange Rotatable
- ASTM B564 UNS N10276 Flange with Tube
- ASTM B564 UNS N10276 Reducing Flanges
- ASTM B564 UNS N10276 CF (ConFlat) Flanges
- ASTM B564 UNS N10276 Flange Bolted Weld-On
- ASTM B564 UNS N10276 Square /Exhuast Flange
- ASTM B564 UNS N10276 Lap Joint Flanges
- ASTM B564 UNS N10276 Girth Flanges
- ASTM B564 UNS N10276 Spectacle Blind Flanges
- ASTM B564 UNS N10276 Anchor Flanges
- ASTM B564 UNS N10276 Screw Flanges
- ASTM B564 UNS N10276 Ring Joint Flanges
- ASTM B564 UNS N10276 Swivel Flanges
- ASTM B564 UNS N10276 ANSI 150 Flanges
- ASTM B564 UNS N10276 Long WN Flanges
- ASTM B564 UNS N10276 Spade Flanges
- ASTM B564 UNS N10276 Spacer Flanges
- ASTM B564 UNS N10276 Figure 8 Flanges